首页 > 智能继保测试仪 > KF86 系列

KF86 光数字一体化继保测试仪

产品编号: 203009
A 10kg kit, fully meet all the requirements for detection and debugging of IEC61850 IEDs, Merge Units,  station control systems and traditional protection relays.
询盘
描述 技术参数 高级功能
  1. With ana-log (6x130V voltage, 6x20A current) and IEC61850 SMV messages simultaneously output.
  2. Built-in dual-core CPU industrial computer, built-in large-capacity SSD solid drive; operating system Embedded Windows 7; 9.7-inch true color LCD screen, 1024×768 resolution, touch screen operation. Can work offline or online;
  3. Provide 8 pairs of LC optical ports, can transmission and receive 36 channels of IEC61850-9-1, IEC61850-9-2 frame format sample values; with optical power test function.
  4. Provide 6 ST output optical ports and 2 ST receive optical ports, which can output 6 sets of sampled value messages conforming to IEC60044-7/8 (FT3) format; can receive 2 sets of FT3 format of IEC60044-7/8 specification Sampled value message;
  5. Can subscribe/publish GOOSE information or output, receive switching, and realize closed-loop testing of protection;
  6. Simulate 12-channel low level output to test the protection of low level input;
  7. Start up to simulate the IED to actively release GOOSE, sampled value signals, to eliminate the reset process of the device under test caused by link interruption after the test is stopped;
  8. The optical port output is sampled or GOOSE can be freely defined; multiple different GOOSE control block information can be subscribed/published;
  9. Sample value channel function, the number of channels can be set freely, up to 36 channels can be configured;
  10. Automatically import SCL (SCD, ICD, CID, NPI) files to realize automatic configuration of sampled values and GOOSE information, and save sample values and GOOSE configuration information as a configuration file for testing.
  11. It can automatically detect optical digital signals from MU, protection device and intelligent operation box, and realize automatic configuration function of sampling value and GOOSE information;
  12. Can simulate abnormal conditions(loss, misorder, quality abnormality, message retransmission, data anomaly, out of step, etc.);
  13. The channel quality of the output SV message can be set, and the simulation unit can be simulated and debug, set to invalid, set to run state, and can simulate double AD inconsistency and other tests.
  14. Built-in GPS/Beidou timing module with GPS, IRIG-B code synchronization time function;
  15. Full-featured software test module, AC, status sequence, recloser test, distance protection, overcurrent protection, inverse time overcurrent, zero sequence protection, ramping test, power direction, differential test, frequency test, synchronize test software modules
  16. With the unit test function, you can test the unit's precision, time accuracy, punctuality accuracy, and data transmission and testing functions.
  17. Support the graphical display of SCD files, the instrument can graphically display the IED device interconnection relationship and virtual terminal connection.
  18. With the IRIG-B code transmission function, when the external GPS is used, it can be used as a timing device.
AC current source
Amplitude & Power 6×20A @ 90VA max each;
3×40A @ 180VA max each;
Accuracy ±1mA @ <0.5A
<0.02%Rd+0.01Rg Typ. @ 0.5A~20A
<0.05%Rd+0.02Rg Guar. @ 0.5A~20A
Range Range I: 2A
Range II: 20A
Automatic Range
DC Offset <3mA Typ./ <10mA Guar
Resolution 1mA
Distortion <0.025%Typ. / <0.07% Guar.
Ascends/Descent response <100us
DC Current source
Amplitude & Power 6×10A @ 50W max
Accuracy ±5mA @ <1A
±0.2% @ ≥1A
Ascends/Descent response <100us
AC voltage source
Amplitude & Power 6×130V @ 65VA max each
Accuracy ±2mV @ <2V
<0.015%Rd+0.005Rg Typ. @ 2~130V
<0.04%Rd+0.01Rg Guar. @ 2~130V
Range Range I: 13V
Range II: 130V
Automatic Range
DC Offset <10mV Typ./ <60mV Guar
Resolution 1mV
Distortion <0.015%Typ. / <0.05% Guar.
Ascends/Descent response <100us
DC Voltage source
Amplitude & Power 6×150V @ 75W max
1×300V @ 150W max
Accuracy ±10mV @ <5V
±0.2% @ ≥5V
Ascends/Descent response <100us
Frequency & Phase Angle
Frequency Range DC ~ 1000Hz, 3000Hz transient
Frequency Accuracy ±0.5ppm
Frequency Resolution 0.001Hz
Phase Range -360°~360°
Phase Accuracy <0.02° Typ. / <0.1° Guar. 50/60Hz
Phase Resolution 0.001°
Binary input
Electrical isolation 8 pairs of electrical isolated each
Input impedance 5 kΩ…13kΩEmpty contact
Input feature 0 V300Vdc Or dry contact
(Binary input turn over potential can be programmable)
Sampling Rate 10kHz
Time resolution 10us
Time measurement range 010-5s
Time accuracy ±1ms @ <1s      
±0.1% @ 1s
Debounce time 0~25ms (Software controlled)
Binary Output
Quantity 4 pairs, Fast speed
Type Banana type 4.0mm
AC break capacity Vmax250VAC/ Imax0.5A
DC break capacity Vmax250VDC/ Imax0.5A
Electrical isolation All pairs isolated
Synchronize port
Satellite synchronization 1 × SMAUse for GPS antenna interface
Support GPS and Beidou Satellite
Fiber IRIG-B 2 × ST1 for transmission, 1 for receiving
Electric IRIG-B 1 × 6Pin 5.08mm phoenix terminal
1 for transmission, 1 for receiving
External trigger synchronization 1 × 4Pin 5.08mm phoenix terminal
external trigger input + external trigger output
Communication interface
Ethernet 1 × RJ45 10/100M
Serial port 1 × RS232
USB 2 × USB2
Weight & Size
Size 390mm×256mm×140mm
Weight 10kg
Display 9.7inch LCD, touch screen
Keypad Number key + direction key
Power supply
Nominal voltage 220V/110V (AC)
Allowable voltage 90V264V (AC);127V350V(DC)
Nominal Frequency 50Hz
Allowable Frequency 4555Hz
Current 10A max
Power Consumption 1200VA max
Connection Type Standard AC socket 60320
Working environment
Operating temperature -10+55 ℃
Relative humidity 595%Non-condensation
Storage temperature -20℃ ~ +70℃
Atmospheric pressure 80kPa110 kPaaltitude 2000m or lower
Fiber port (IEC61850 LC type)
Type 100Base-FX (100Mbit,Fiber, full duplex)
Port Number 8 Pairs
Interface type LC
Cable model 62.5/125μm(Multiple-mode fiber, orange)
Wave length 1310nm
Transmission distance > 1Km
Status indication SPD Green (lights): active connection
Link\AcT Yellow (blinking): data exchange
Fiber serial port (IEC61850 ST type)
Standard IEC60044-7/8
Port Number 6 for transmission, 2 for receive
Interface type ST
Wave length 850nm
Low-level signal output
Output channels 12 channels
Output port type Phoenix terminal
Output range AC:08Vrms
DC: 08V
Max current output 5mA
Accuracy <0.<2%0.010.8 Vrms
<0.1%0.88 Vrms
Resolution 250µV
Harmonic(THD%) (THD%)<0.1%
Frequency range DC1.0kHz
Frequency accuracy 0.002%Normal frequency
Frequency resolution 0.001Hz
Phase range 0359.9°
Phase accuracy <0.1°50/60Hz
Phase resolution ±0.1°